Notes about open source software, computers, other stuff.

Using Plugwise adapters with Linux

Yesterday I received a small package I had ordered: the Plugwise Home Start kit. According to the box it is an energy management and control system. The idea is that you insert a sort of adaptor between a power socket and a device and using the Plugwise Source software you can monitor the power usage of the device. Furthermore, you can use the software to create schedule to turn the device on and off at a specific time.

The package contains the following:

  • a USB adapter (called the Stick)
  • a Circle+, the master adaptor that keeps track of the other devices in the network
  • a Circle, the regular members of the Plugwise network

The Circles communicate to each other using the ZigBee protocol in the 2.4GHz range. According to the documentation, the range of each Circle is about 5m.

Unfortunately the Source software only runs on windows. Luckily some people have already analysed the protocol and written some software to control the Plugwise devices (see links below).

First steps

Plugging the USB dongle in gives the following output in /var/log/syslog:

Nov 19 12:20:37 barabas kernel: [  182.855742] usb 1-1.6.1.1.3: new full speed USB device number 14 using ehci_hcd
Nov 19 12:20:37 barabas mtp-probe: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1.1/1-1.6.1.1.3"
Nov 19 12:20:37 barabas mtp-probe: bus: 1, device: 14 was not an MTP device
Nov 19 12:20:37 barabas kernel: [  183.169370] usbcore: registered new interface driver usbserial
Nov 19 12:20:37 barabas kernel: [  183.169389] USB Serial support registered for generic
Nov 19 12:20:37 barabas kernel: [  183.169431] usbcore: registered new interface driver usbserial_generic
Nov 19 12:20:37 barabas kernel: [  183.169434] usbserial: USB Serial Driver core
Nov 19 12:20:37 barabas kernel: [  183.171310] USB Serial support registered for FTDI USB Serial Device
Nov 19 12:20:37 barabas kernel: [  183.171552] ftdi_sio 1-1.6.1.1.3:1.0: FTDI USB Serial Device converter detected
Nov 19 12:20:37 barabas kernel: [  183.171588] usb 1-1.6.1.1.3: Detected FT232RL
Nov 19 12:20:37 barabas kernel: [  183.171591] usb 1-1.6.1.1.3: Number of endpoints 2
Nov 19 12:20:37 barabas kernel: [  183.171595] usb 1-1.6.1.1.3: Endpoint 1 MaxPacketSize 64
Nov 19 12:20:37 barabas kernel: [  183.171598] usb 1-1.6.1.1.3: Endpoint 2 MaxPacketSize 64
Nov 19 12:20:37 barabas kernel: [  183.171602] usb 1-1.6.1.1.3: Setting MaxPacketSize 64
Nov 19 12:20:37 barabas kernel: [  183.171975] usb 1-1.6.1.1.3: FTDI USB Serial Device converter now attached to ttyUSB0
Nov 19 12:20:37 barabas kernel: [  183.171998] usbcore: registered new interface driver ftdi_sio
Nov 19 12:20:37 barabas kernel: [  183.172002] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
Nov 19 12:20:37 barabas modem-manager[901]: <info>  (ttyUSB0) opening serial port...
Nov 19 12:20:49 barabas modem-manager[901]: <info>  (ttyUSB0) closing serial port...
Nov 19 12:20:49 barabas modem-manager[901]: <info>  (ttyUSB0) serial port closed
Nov 19 12:20:49 barabas modem-manager[901]: <info>  (ttyUSB0) opening serial port...
Nov 19 12:20:55 barabas modem-manager[901]: <info>  (ttyUSB0) closing serial port...
Nov 19 12:20:55 barabas modem-manager[901]: <info>  (ttyUSB0) serial port closed

lsusb gives:

Bus 001 Device 014: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

I couldn’t get the pairing to work under Linux (with the PlugwiseOnLinux scripts), Even though I corrected the MAC address in the python code. I then tried it in Windows where I failed at first also. After resetting the Circle+ and the Circle (removing/inserting them into the power outlet with 3 second intervals, as mentioned in the FAW on the plugwise website) I managed to pair the Circles. Looking back, I think I didn’t wait long enough for the pairing to work under Linux. During the trials in Windows I noticed that the pairing can take up to about 5 minutes…

Back in Linux I used python-plugwise (see links below) to turn the Circles on and off, e.g. this is how I turn my Circle+ off (note that I am a member of the dialout group, which is needed to communicate with /dev/ttyUSB0):

$ plugwise_util -d /dev/ttyUSB0 -m 000D6F0000B1C117 -s off

This is what I want! The only minor downside of python-plugwise is that it depends on the crcmod python library, which apparently is not package for Debian/Ubuntu. So installing using the python-setup framework as mentioned in the README is necessary.

Reading out the current power usage of my Circle works also:

$ plugwise_util -d /dev/ttyUSB0 -m 000D6F0000B85134 -p
power usage: 2.27W

So, no that it works, what am I going to do with the Plugwise modules? I’m going to use them in my backup scripts to switch the power to my external hard drives.

Making a .deb

I used checkinstall to make a package of python-plugwise. In a working directory, first check out the source code of python-plugwise using mercurial, as mentioned on the web site:

$ hg clone https://bitbucket.org/hadara/python-plugwise

Then run checkinstall and don’t forget to fill in the details correctly. For example, the package name is ‘python’ by default, which you definitely don’t want, since that would overwrite Ubuntu’s default ‘python’ package. Also make sure that you remove the crcmod python library if you installed python-plugwise before, otherwise it won’t get packaged. The output below shows the final values, after I changed them.

$ sudo checkinstall -D python setup.py install
 
checkinstall 1.6.2, Copyright 2009 Felipe Eduardo Sanchez Diaz Duran
	      This software is released under the GNU GPL.
 
 
 
*****************************************
**** Debian package creation selected ***
*****************************************
 
This package will be built according to these values:
 
0 -  Maintainer: [ lennart@karssen.org ]
1 -  Summary: [ python-plugwise is used to control the Plugwise power switches as well as read out information on power usage. ]
2 -  Name:    [ python-plugwise ]
3 -  Version: [ 0.2-hg-20111120 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ python-plugwise ]
9 -  Alternate source location: [  ]
10 - Requires: [ python ]
11 - Provides: [ python-plugwise ]
12 - Conflicts: [  ]
13 - Replaces: [  ]
 
Enter a number to change any of them or press ENTER to continue:

You can check the contents of the package to make sure the crcmod
files are included using dpkg:

$ dpkg --contents python-plugwise_0.2-hg-20111120-1_amd64.deb

An idea for later: make an SNMP module that calls plugwise_util to get the power usage so that I can monitor the power usage of a device using Cacti.

Links

Related Images:

3 Comments

  1. Stefan Voit

    Hey Sir, do you have a Protocol description for those PlugWise Devices?
    Could you mail wahtever you got to StefanVoit@gmx.at

    • Danny

      Is RWE hacking Plugwise now? Grtz Danny

  2. LCK

    Stefan, I sent you an e-mail.

Leave a Reply to LCK Cancel reply

Your email address will not be published. Required fields are marked *

© 2024 Lennart's weblog

Theme by Anders NorénUp ↑